Liitokala Lii-PD4 Lii-S2 Lii-S4 Lii-S6 LCD 3.2V 3.7V 3.8V 1.2V 18650 18350 26650 20700 Lithium-ion LiFePO4 Battery Charger

Description

Lii-PD4 Charger Electrical Parameters:

1. Input : AC cable 110-240V 50/60Hz included/ DC 12V 1Aselective

2. Output voltage: DC 4.2V for Li-Ion 3.7V

DC 4.35V for Li-Ion 3.8V IMR

DC 3.65V for LiFePO4

DC 1.48V for NiMH/NI-Cd

3. Output current: Li-Ion/IMR/LiFePO4 2000mA x 1only for slot#4,

1000mA x 2, 500mA x 3 500mA x 4

NiMH/NiCd: 1000mA x 2, 500mA x 3 500mA x 4

4. Constant voltage, cut-off current: less than 100mA

5. Standby current: less than 15mA

Compatible battery types and sizes

Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340RCR123, 14500, 10440

NiMH/Cd: AA, AAA,SC, C

Size and weight:

147mm x 100mm x 37mm L x W x H

Weight: approx221g not including AC cable

Lii-PD2 Charger Features:

1. Adopt DC12V1A nominal input, two-slot independent charging and microcomputer management system;

2. The biggest highlight of this charger is that it can charge the battery regardless of polarity!

3. There are three levels of charging current: 0.5A/1.0A/2.0A, the default charging is 0.5A, you can long press the corresponding button to select the charging current;

4. When charging, the LCD can display channel CH and the charging current, voltage, time, capacity and battery type of this channel Li-Fe 3.20V /

Li-ion 3.70V /Li-ion 3.85V IMR; the total charging current of the two slots does not exceed 2A, that is, when one of the slots is charged with 2A current, and then the battery is charged in the other slot, the front 2A current will drop back Charge up to 1A current; when the battery is fully charged, the LCD will display FULL;

5. It can automatically identify lithium battery Li-Ion 3.70V battery and nickel-metal hydride Ni-MH battery, and manually select lithium iron phosphate battery 3.20V and Li-Ion 3.85V battery;

6. With 0V voltage activation function, 1.65-2.20V cannot be charged but there will be activation current trickle charging.

7. There are multiple safety protection functions such as overcharge, overdischarge, short circuit, etc. At the same time, it can intelligently and automatically identify bad batteries;

8. Charging mode: constant current and constant voltage.

Electrical technical parameters:

1. Input power: DC 12V 1A

2. Output voltage: DC 4.20V for Li-Ion

DC 4.35V for IMR

DC 3.65V for LiFePO4

DC 1.48V for NiMH/NI-Cd

3. Output current optional: Li-Ion/IMR/LiFePO4: 2000mA x 1 only one/1000mA x 2/500mA x 2

NiMH/NiCd: 500mA

4. Constant current/constant voltage charging, cut-off current: <100mA;

5. No-load standby current: <15mA;

Lii-S2 Charger Electrical Parameters:

1. Input : DC 5V 2Aselective;

2. Output voltage: DC 4.2V for Li-Ion 3.70V

                    DC 4.35V for Li-Ion 3.85V IMR

                    DC 3.65V for LiFePO4

                    DC 1.48V for NiMH/NI-Cd

3. Output current: Li-Ion/IMR/LiFePO4 2000mA x 1;1000mA x 2/500mA x 2 

                           NiMH/NiCd:  500mA

4. Constant voltage, cut-off current: less than 100mA;

5. Standby current: less than 15mA.

Compatible battery types and sizes

Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340RCR123, 14500, 10440

NiMH/Cd: AA, AAA,SC, C

Size and weight:

133mm x 100mm x 35mm L x W x H

Weight:  approx175g

Cautions:

This charger can charge all cylindrical rechargeable batteries 3.7V Li-Ion , 3.8V IMR, 1.2V Ni-MH/Cd, 3.2VLiFePO4

Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit

If DC input, only 12V 1A is recommended

Mind heating while charging

Remove the charger from power source after charging complete, and remove the battery from the charger at the same time

For indoor use only

The displaying data only for reference, please refer to professional instrument for more accurate data

Specifications and functions:

1. Multi-power input: AC cable 110-240V 50/60Hz included/ 12V 1A adapterselective, four independent charging and micro computer management system.

2. Charge current intelligent auto-set of total three levels: 500mA /1000mA/2000mA,2000mA is fixed only for slot#4.

3. Multi-functional LED charging indicators: for charging progress: 25 – 50 – 75 -100 , battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V IMR and for charging current: 0.5A/1A/2A

4. Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteriesIMR

5. Refresh for OV battery. It will not charge any battery of1.65 -2.20V refresh current can be detected only

6. Multi-safety protection function of over-charge and over-discharge, short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.

7. Charging  at constant voltage and current

Button and LED :

1. Button of Mode: While power supply is connected,  1 Short click the mode button to change the battery type. It will start to charge 5 seconds after setting the battery type 3.2V or 3.80V,  1.2V Ni-MH and 3.7V li-ion can be detected automatically, so it needs setting only 3.2V and 3.8V batteries; 2 During charging process, short click the mode button to display battery type.

Note: Battery type can be only selective before charging starts.  

2. LED: While power supply connected, all LEDS light up immediately  1 If no battery is inserted, the 500mAh LED one of the three current display LEDS will keep on and others will be off.  2 When battery is inserted and detected, 4 LED charging indicator for the channel will be on among which 3.7V battery type LED keeps flashing indicating to set the battery type, if no operation in 5 seconds, it begins by automatic detectionLi-Ion 3.7V or NIMH  then four LED indicators will display the charging status. 3 During charging, short click the Mode button to show the battery type within 5 seconds; 4 If no power supply is connected, inserting a battery, it can quick shows the remaining charger volume of the battery.

x LED display graphic reference: 

Order description

Lii-S6 and adapter:Lii-S6S charger + 12V/3A adapter + manual

Lii-S6 Full: Lii-S6 charger + 12V/3A adapter + 12V Car Cable + manual

Lii-S6 6-Slot Auto-Polarity Detect Charger

x Auto-Polarity Detect.

x 12V/3A input with a total power of 36W.

x 6 slots work independently. It can be charged together with a variety of battery mixes.

x Can accommodate 32700, 26650, 21700, 20700, Ni-MH SC and other large batteries

x A variety of protection, charging safe.

  Charger Parameters
  x Auto-Polarity Detect Charger
x Input:DC 12V/3Amin

x Output:DC 4.20V 2000mA x 3; 1000mA x 6; 700mA x 6; 500mA x 6

x DC 4.35V 2000mA x 3; 1000mA x 6; 700mA x 6; 500mA x 6

x DC 3.65V 2000mA x 3; 1000mA x 6; 700mA x 6; 500mA x 6
x DC 1.48V 500mA x 6
x Compatible for all rechargeable batteries;
x Ni-MH/Cd: AA,AAA,A,SC,C size

x Li-ion/IMR/LiFePO4: 26650,20700,18650,18490,17700,17500,16340RCR123,14500,10440
 

Charger For Big Battery hig capacity battery
 

x For large or large-capacity batteries, the charger has three 2000mAh output channels 1, 3, 6 Slot. This will greatly reduce the charging time.

x Note: Charging 4 batteries or more is invalid. Not valid for 1.2V Ni-MH/Cd batteries.
  Mixed charging.
 

x The charger is 6-Slot working independently. It can charge Li-ion batteries and Ni-MH batteries at the same time.
  Auto-Polarity Detect
 

x Lii-S6 Auto-Polarity Detect, which does not require you to deliberately distinguish the positive or negative of the battery. Just put the battery in the charger.
  Non-slip rubber pad at the bottom
 

x The bottom is provided with a non-slip rubber pad to make the charger more stable and reliable.
  Other