Description
ESP32 Development Board Wireless WiFi Bluetooth-compatible Dual Core ESP8266 Filters Module 2.4GHz RF ESP32 High Quality
Option 1
Description:
ESP32-WROOM-32 is a general-purpose Wi-Fi BT BLE MCU module with powerful functions and a wide range of uses. It can be used for low-power sensor networks and demanding tasks, such as voice coding, audio streaming, and MP3 Decoding etc.
The core of this module is the ESP32-D0WDQ6 chip x , which is scalable and adaptive. The two CPU cores can be controlled separately. clock
The frequency adjustment range is from 80 MHz to 240 MHz. The user can cut off the power of the CPU and use the low-power co-processor to continuously monitor the peripherals
The status change or whether some analog quantity exceeds the threshold. ESP32 also integrates a wealth of peripherals, including capacitive touch sensors, Hall sensors,
Low noise sensor amplifier, SD card interface, Ethernet interface, high-speed SDIO/SPI, UART, I2S and I2C, etc.
The module integrates traditional Bluetooth, low-power Bluetooth and Wi-Fi, and has a wide range of uses: Wi-Fi supports a wide range of communication connections, and also supports
The router is directly connected to the Internet; while Bluetooth allows users to connect to mobile phones or broadcast BLE Beacon to facilitate signal detection. Sleep of the ESP32 chip
The current is less than 5 µA, making it suitable for battery-powered wearable electronic devices. The data transmission rate supported by the module is up to 150 Mbps, antenna output
The power reaches 20 dBm, which can achieve the widest range of wireless communication. Therefore, this module has industry-leading technical specifications,
Excellent performance in terms of transmission distance, power consumption, and network connectivity.
The operating system of ESP32 is freeRTOS with LwIP, and TLS 1.2 with hardware acceleration is built-in. The chip also supports OTA encryption
Upgrade, it is convenient for users to continue to upgrade after the product is released.
Specifications:
Test reliability: HTOL/HTSL/uHAST/TCT/ESD
Wi-Fi protocol: 802.11 b/g/n 802.11n, speed up to 150 Mbps
A-MPDU and A-MSDU aggregation, support 0.4 µs guard interval
Frequency range 2.4 GHz ~ 2.5 GHz
Bluetooth protocol: Compliant with Bluetooth v4.2 BR/EDR and BLE standards
Bluetooth radio: NZIF receiver with -97 dBm sensitivity, Class-1, Class-2 and Class-3 transmitters, AFH
Bluetooth audio: CVSD and SBC audio
Module interface: SD card, UART, SPI, SDIO, I2C, LED PWM, motor PWM, I2S, IR, pulse counter, GPIO, capacitive touch sensor, ADC, DAC, two-wire automotive interface TWAI®, compatible with ISO11898- 1
On-chip sensor: Hall sensor
Integrated SPI flash: 4 MB
Working voltage/supply voltage: 3.0 V ~ 3.6 V
Package Included:
1 x module
Option 2
Description:
1. The onboard CP2102 stable USB to TTL chip ensures the normal communication of the serial port.
2. Support automatic download, no need to manually switch download and running mode.
3. Immersion Gold Craft
4. Support development on Windows system cygwin and msys32 simulation environment and Linux system
5. Support ESP32-Arduino
Specifications:
ESP-WROOM-32 is a general-purpose Wi-Fi BT BLE MCU module with powerful functions and a wide range of uses. It can be used for low-power sensor networks and demanding tasks, such as voice encoding, audio streaming, and MP3 decoding Wait.
The core of this module is the ESP32-D0WDQ6 chip x , which is scalable and adaptive. The two CPU cores can be individually controlled or powered on. The adjustment range of the clock frequency is from 80 MHz to 240 MHz. The user can cut off the power of the CPU, and use the low-power coprocessor to continuously monitor the status changes of the peripherals or whether certain analog quantities exceed the threshold. ESP32 also integrates a wealth of peripherals, including capacitive touch sensors, Hall sensors, low-noise sensor amplifiers, SD card interface, Ethernet interface, high-speed SDIO/SPI, UART, I2S and I2C.
CPU and memory
ESP32-D0WDQ6 contains two low-power Xtensa® 32-bit LX6 MCUs. On-chip storage includes:
• 448 KB of ROM, used for program startup and kernel function calls.
• 520 KB on-chip SRAM for data and instruction storage.
• The 8 KB of SRAM in RTC, that is, RTC slow memory, can be accessed by the coprocessor in Deep-sleep mode.
• The 8 KB of SRAM in the RTC, that is, the RTC fast memory, can be used for data storage and accessed by the main CPU when the RTC is started in Deep-sleep mode.
• 1 kbit eFuse, of which 256 bits are the system MAC address and chip settings; the remaining 768 bits are reserved for user applications, which include Flash encryption and chip ID.
• ESP-WROOM-32 integrates 4MB of SPIFlash
Package Included:
1 x module
Notes:
This product does not provide any technical support, and buy it carefully without the use of electronic components
Option 3
Description:
Esp32-s is an ultra small volume multi-functional RF module independently designed and developed by Shenzhen anxinke Technology Co, Ltd Dual core esp32 is used as the main control module with PCB board antenna and PEx base antenna which can be used according to the scene requirements
Esp32 Is used to Integrate WIFL, traditional Bluetooth and ble beacon, wlth two hlgh performance 32-blt lx6cpu, 7-Stage plpeline archltecture, main frequency adjustment range from 80MHz to 240mhz sensor on chIp:JAL sensor, temperature transmitter, etc
Specifications:
ESP32-S is an ultra-small multi-function radio frequency module. Using dual-core ESP32 as the main control, this module is equipped with PCB onboard antenna and IPEX base antenna interface, which can be used according to the needs of the scene.
The main chip uses a low-power dual-core 32-bit CPU with a main frequency of up to 240MHz and a computing capacity of up to 600DMIPS
Default 32Mbit SPI Flash, 520KB SRAM
Support SoftAP and Station mode
Ultra-small 802.11b/g/n Wi-Fi BT/BLE SoC module
Support UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.
Support firmware upgrade FOTA
Antenna supports onboard antenna or IPEX socket output
Package Included:
1 x ESP-32S module
Notes:
To purchase electronic components and modules, please have a certain basic knowledge of electronics. Most modules only provide descriptions or materials, and there is no technical consulting support. Please be careful for beginners.
Option 4 5
Description:
100 Brand New and High Quality!
This WIFI relay based on AI-Thinker ESP-01S WIFI module. It is designed for smart home, Internet of thing and other DIY project. With this smart relay, you will easy to DIY your smart switch to control any device by your phone anywhere.
Specifications:
Product size: 37 x 25mm
Operating voltage: DC5V
Communication: WIFI ESP8266 module
Transmission distance: the maximum transmission distance of 400m open environment, mobile phone equipped with WIFI module
Load: 10A/250VAC 10A/30VDC, the relay pull 100,000 times
Package Included:
1 x Relay module
1 x ESP-01S
![](http://ae01.alicdn.com/kf/S1d9d87acea3642c49340a27db0b6899cv.jpg)
![](http://ae01.alicdn.com/kf/Se91a43aad880448d87ba187c839f2ff0n.jpg)
![](http://ae01.alicdn.com/kf/S105c23badcd147ffa28fe9985f28a73aR.jpg)
![](http://ae01.alicdn.com/kf/S6a74bd003c4f45faa430b4d01b201a07V.jpg)
![](http://ae01.alicdn.com/kf/Sdc85644c18e64c13bf15b7c178a3c0f1I.jpg)
![](http://ae01.alicdn.com/kf/Sbd0f7cce2c5d4d82b79a47f223b3140fM.jpg)
![](http://ae01.alicdn.com/kf/Sbf55ec19e09d417ab7930eb5101ed4b63.jpg)
![](http://ae01.alicdn.com/kf/S0bc6c12b24be4e46bc0129ae9f847d4bt.jpg)
![](http://ae01.alicdn.com/kf/S283edadd1ecd4b93820e983a8b0f410fY.jpg)
![](http://ae01.alicdn.com/kf/S8f1f2ee6316b4f8899208c45bc10f5bdX.jpg)
![](http://ae01.alicdn.com/kf/H5403081d2d064e698d816ee06aea9692S.jpg)
![](http://ae01.alicdn.com/kf/Hd7f04cb202f745b1b2583b9fa97b5ef6U.jpg)
![](http://ae01.alicdn.com/kf/H725357ab25d141448a4e076013d44737a.jpg)
![](http://ae01.alicdn.com/kf/Sbb5724a753ce4e8eb800b1bba3552de3s.jpg)
Reviews
There are no reviews yet.